RECENT AUDIO NOTES

THD Hot Plate 2. Offers Bright and Deep switches for tailoring your sound – Bright switch gives you two different high frequency levels to compensate for an overly bright, or dull speaker cabinet while the Deep switch offers two distinct bass settings to help you fill out the bottom end, or reduce the bass in a cabinet with too much low end. Has built in noise reduction up to 10dB, line out, and a fan to keep it cool. For full specs click here for THD’s site. Hotplates have been our most popular attenuator thanks to THD’s top-notch engineering and superb build quality. This one is built for a 4 Ohm load and works best for amps with a 4 ohm output and 4-ohm speaker load including 8 ohm combo with 8 ohm extension cab – or a 4 ohm combo or head.

REFERENCE COMPONENTS

They are visual icons that have become separated from their actual sonic function due to the fact that they do not interface with any other audio equipment that any normal living person would own. They look very similar to the acoustic horns that are mechanically coupled to the needles of ancient record players, but in fact these are electrical.

On the other hand, the early electro-mechanical horns were made for use with early Tube radios.

After listening to a total of more than portable Bluetooth speakers over the past two years, we think the UE Roll 2 is the best choice for most listeners. It sounds good and plays loud enough to fill a hotel room, plus its slim, waterproof, rugged design makes it an ideal companion for anything from a luxury hotel stay to a weeklong hiking trip.

Permission is hereby granted to quote our text so long as proper credit is given. Shootouts From September to February , our audiophile panelist Jim systematically evaluated the sound of many top tuners most provided by our benefactor Jesse in side-by-side shootouts. Shootouts competed for Jim’s attention with many other audio projects and no new installments are now expected. A -C- appears next to those few tuners that seem to get everything right as far as sound quality is concerned.

The familiar numerical listing need not always apply within this elite group. The -M- class indicates excellent tuners that may not have every minute characteristic that satisfies Jim’s tastes. Jim’s rules for the better tuners are 1 a focused, articulate and musically involving midrange, 2 sweet, natural-sounding highs any hash, sibilance or non-musical detail added by the tuner itself will take points away , and 3 last, but not always least, is good, deep bass and a sense of dynamics.

All the other audiophile buzzwords usually fall into place if these three criteria are met. Remember them as you read the shootouts and agree or disagree with Jim’s findings.

The Best Portable Bluetooth Speaker for Reviews by Wirecutter

Podcasting , Technology Any system is only as good as the weakest link in the chain and audio systems are certainly no exception to the rule. Attaching speakers to your Hi-Fi system usually only requires a few cables. These potential problems are easy to spot with a few simple tests and luckily the corresponding remedies are equally simple.

The Acapella TW 1S was added to the Class A Reference Speakers back in January This action was somewhat unusual since I had not heard the tweeters in my own audio system, or even in a friend’s system that I was familiar with. Instead, four straight days of concentrated auditions, at the CES, compelled me to give them the recognition I felt they deserved.

In my case, I also have the added burden that two of my main contributors are or were speaker manufacturers, some of whose products you will see as References below. Other associates are distributors of speaker lines. Accordingly, I made the only decision I could: All the choices in this category are mine alone. What I say to those who question my objectivity is; please closely read the rest of the References first to see my consistency and sensitivities, before making judgements on the few choices you may be understandingly skeptical about.

Any final and true judgement concerning these or any specific components requires a personal listening session with them. If this list inspires such an event, it has been a success, no matter what the ultimate result.

What is tone (part 3)Setting up your amp

August 17, 9: This is all fine but you are still limited with Bluetooth which is why no one really makes large Bluetooth systems but simple portable devices. As stated before bandwidth with Bluetooth is limited in he first place so you will not get the sound you would over a wireless 5ghz signal and there is still the range of Bluetooth which is very limited. Although it has improved in distance it is still not ideal.

found a speaker identical to yours. is it possible to buy a amp like you made? Would like to hook it up to i pod for my sisters ’s house. joe.

Speaker design basics Designing and building speaker systems can be fun and rewarding. Loudspeaker design looks, on the face of it, deceptively simple. Unfortunately, the number of variables are infinite, and the skill of the designer is one of balancing the variables to achieve an acceptable result within the design specification. There is no such thing as a perfect loudspeaker!

When designing loudspeakers lots of things needs to be considered. First you need to consider the intended use for your spaker.

Can you hook up 2 speakers to a mono block amp

If you are interested in seeing some of what else is available we have compiled a larger listing of some box sets in our Library. After all it’s all about the music! And of course if you want to hear how great all of this wonderful music can really sound we have a wide range of CD Players from rather modest right on up to the truly high end Spectral SDR SL. Just give us a call and we’ll let you hear some sublime sounding music played through one of our fine digital or analog front ends!

In addition, since Acoustic Sounds licensed many of the commercial label titles, accessed the master tapes, and exercised complete control of the mastering process—at least with those titles, it should not experience HDTracks’ “start up” issue of getting pre-mastered files that were on occasion not true high resolution files, but rather “up sampled” from CD resolution files or from actual CDs. Although as of late their Super HiRez catalog of high resolution files is not as large as that of HDTracks , they will definitely be expanding their offerings going forward.

Back to the GEO Home Page Musical Instrument Tube Amp Building, Maintaining and Modifying FAQ. Much of this material applies to building or re-building hi-fi equipment, as well but it was originally intended for musical instrument crazies.

This action was somewhat unusual since I had not heard the tweeters in my own audio system, or even in a friend’s system that I was familiar with. Instead, four straight days of concentrated auditions, at the CES, compelled me to give them the recognition I felt they deserved. An associate, who was with me for the entire duration of the CES, fully agreed with my sonic assessment.

We were both simply far too impressed with the Acapella to do anything else. At the time, I wrote a short description of the TW 1S which couldn’t have been more positive and, even after more than 13 years, I think it still holds up for the most part, though with some reflection, as well as some recent events, I now feel forced to qualify my most extreme statement. Now in , I am actually living with these super tweeters.

Further, I have extensively experimented with them, and two other highly critical listeners have also heard the results in my system as well. One of these two extra listeners assisted me in the experiments. Below are the results of the experiments and our numerous listening sessions.

The Guitarists’ Guide to DAW Recording by TweakHeadz Lab

It shows on the picture by the two AC outputs 7 and 8. I cannot find a download for the manual so I cannot confirm that both of these AC outputs are milliamps but this is what it looks like from the data on their website. Will this damage the unit? The amp comes with FX loop but currently my new setup is running everything upfront.

There are stereo Bluetooth speakers with two separate enclosures you can move around, but of course if you have music that plays left or right, if you move one of the speakers to another area you.

The publisher makes no warranty, either expressed or implied, as to the accuracy, effectiveness, or completeness of the following material and assumes no liability for damages, either incidental or consequential, that may result from the use of this information: Have a local dis-interested 3rd party inspect the vehicle if it is not possible for you to inspect personally.

We rely on our members and visitors to help us keep the website up to date. To report an item as sold, bogus, or out-of date please contact our webmaster at MyPlasmaCutting gmail. Things have changed a lot since the first kits were available back in the 80s.. Technology has moved on somewhat and people expect much more from even their standard family hatchback these days Ford thunderbird power steering rack with a custom tubular race suspension on front. Rear has lower a arm and springs Will need coil over shocks in the future 12″ vented cross drilled corvette calipers rotors on the front.

Most of the wiring is done! Dual rear radiators mounted and plumes.. Pontiac Fiero based Lamborghini Countach replica. All the hard work has been done, car is mounted and doors hung.

How to Power Two Speakers with a One Channel Amp: 7 Steps

This action was somewhat unusual since I had not heard the tweeters in my own audio system, or even in a friend’s system that I was familiar with. Instead, four straight days of concentrated auditions, at the CES, compelled me to give them the recognition I felt they deserved. An associate, who was with me for the entire duration of the CES, fully agreed with my sonic assessment.

We were both simply far too impressed with the Acapella to do anything else. At the time, I wrote a short description of the TW 1S which couldn’t have been more positive and, even after more than 13 years, I think it still holds up for the most part, though with some reflection, as well as some recent events, I now feel forced to qualify my most extreme statement.

Monoblocks can be either tube amplifiers or solid-state amplifiers, and because you need two monoblocks for a stereo system, they can be heavy, hot and difficult to set up in a small room. Hooking up the amplifiers themselves requires proper placement in relation to the speakers and preamp.

Best amp for modern keyboard players I love this amp. Until a better, more reliable company comes out with one that sounds better than what they currently offer, I’m going to have to endorse the generic brand known as Read complete review I love this amp. Until a better, more reliable company comes out with one that sounds better than what they currently offer, I’m going to have to endorse the generic brand known as Behringer.

I own 1 roland Kc and a KC and this thing blows them out of the water. This amp is basically an affordable version of the Roland but they stepped it up with cleaner sound, beefier low end and power.

can i hook 4 speakers up to one mono amp

Tube Stuff Suppliers Appendix B. Tube amps have always been the amplifier of choice for the working musician. Musical myth has ascribed almost magical tone to them. While the results may not be entirely magic, tubes do have a sound that is different from solid state amplifiers, and one that happens to make amplified music sound better to the human ears and brain.

There are lots of technical and psuedo-technical explanations for why this should be true, but there is enough solid evidence that it is a real effect to trust it.

Oct 12,  · If you have two speakers you want to power from a single-channel amplifier, the first thing you should do is determine the output impedance of the amplifier and the impedance of your speakers. Ideally, the output impedance of the amplifier should match the impedance of Views: K.

By Tweak It might seem strange for some of you to think I might know anything about guitars, with my small claim to notoriety being sampling and programming, but the truth is, I was originally a guitar player who played in real bands. I’ve been recording acoustic and electric guitars so long I’d rather not tell. I’ve also gone pretty deep into midi guitar and have programmed guitar patches on synths for MIDI guitars. The good thing for you is that you get the advantage of some hard won tips on recording guitars and making your playing sound the best it can be.

Lets start with a basic guide to ways to record your guitar on your computer. First you need a way to get audio into your computer. The ideal way is to get an audio interface that has a Microphone preamp for recording acoustic guitar, vocals, drums, etc. These don’t have to be expensive, and many are custom designed for the guitarist. They might come with digital models of guitars and amps built right into the interface or in the software that comes in the package.

See my article on audio interfaces for a general overview. It can be used on stage to substitute for racks of effects pedals and amp heads and cabs, or in the studio both as a processor and an audio interface. One feature is you can also record basses, drums, vocals, acoustic guitars as well as Electric guitars. Comes with the line 6 software. This is not a live processor like the Eleven, its an audio interface that does the Line 6 magic in software in the sequencer of your choice.

PRODUCT FAQ

Just what is tone? What is a good tone and how do you achieve it? Which amps you should choose for your setup and how to get the tones you want. We also looked at the importance of choosing the right guitar — not only for your technique and rig but also for inspiration to play and create music. Check out part 1 and part 2.

3) Both speakers connected to the amp in a mono-bridged configuration. (For 2 and 3 we assume the speakers would be connected in parallel with each other.) Clearly in terms of rated power delivered to each speaker each of these three most obvious methods are equal.

Just what is tone? What is a good tone and how do you achieve it? Which amps you should choose for your setup and how to get the tones you want. Check out part 1 and part 2. Amps People tend to prioritize guitars and a bunch of pedals and forget the importance of a good sounding amp. Choosing the right amp for your setup is crucial for getting the tones you want from your guitar and pedals.

I strongly suggest that you buy a guitar and amp before you spend all your savings on pedals. This will ensure the best fundament for your tones and playing. A tube amp consist of a pre-amp section that takes the small signal from your guitar and amplifies it enough to drive the power amp section. Most amps allow you to manipulate the pre-amp signal with a number of gain and EQ controls. The signal is then fed into the power amp, which gives the power to drive the speakers.

Why does my Mono Subwoofer amp have 2 sets of speaker terminals


Hello! Would you like find a partner for sex? It is easy! Click here, registration is free!